on the impact crusher.
1.Because the impact crusher machine running smoothly, when a sudden violent vibration of
the machine, you should stop immediately and identify the cause.
2.under normal circumstances, bearing the maximum temperature should not exceed 70 degrees,
such as more than 70 degrees, you should stop immediately, identify the cause.
3.You should turn around and use or change in time, wear and tear when the hammer reaches
the limit signs.
4.Assembly or replacement of hammer, you must keep the rotor balance, static balance should
not exceed 0.25kg.m
5.When the rack liner wear, you should be replaced to avoid wear and tear case.
6.Check all bolts before starting the fastening state.
7.When the rack liner, back liner, hammer and other wearing parts to replace worn or when
the machine fails and needs to eliminate, the use of ratchet device after opening and
closing cover, replacement and maintenance.
8.After the cover in the account before you unscrew the lock nut and bolt, then put away
the pads cover the bottom of the arm. Turned on, to be 2 people simultaneously, pulling the
ratchet device cover that is slowly opening. When approaching the finish line on the bottom
of the arm pads should touch the bottom slope in advance to ensure safe, secure.
9.After the completion of the replacement or repair, turn the small handle on the ratchet
device between the two simultaneously, can slowly closed the lid. After the cover is closed
before the need to thoroughly clean off the surface.
10.Manner the friction surface lubrication regularly filling oil into a bearing eight-hour
work, grease once every three months, oil change, the application of clean gasoline or
kerosene carefully cleaned bearings, adding grease to the bearing capacity of 50% .