you're reading...
Hammer Crusher

Hammer Crusher Notes

1. Hammer crusher installation 
(1)In order to avoid the hammer crusher impact vibration generated when the building, structure, hammer crusher and concrete foundation should be pad to the middle of  hardwood pallets or other cushioning material. 
(2)hammer crusher installation, electric central idea and the rotor shaft should ensure straight, so as not to affect the coupling of the elastic sleeve and cause premature damage to the bearing fever.

2.The use of hammer crusher                                                                                                             
(1) Hammer crusher preparatory work before starting                                                                                                 
Check whether there is oil bearing
Check all fasteners are fully tightened
Check whether the body is not easy to broken metal or other debris
Check the hammer and the screen is normal of the gap between
(2) Hammer crusher start
The inspection confirmed that the machine and the transmission department of normal before starting.
If not found after starting a normal situation, you should stop running. Necessary to identify and remove abnormal situation before restarting hammer crusher.
(3) Hammer crusher operation
Average is required to join the broken material and shall be distributed in the departments of the full length of the rotor   to  prevent the sudden increase in load power idea
Check the screening schedule of the situation, immediately remove any blockage
Bearing in normal circumstances, should be 350C temperature range, the maximum temperature not exceeding 700C. Parking in excess of 700C should immediately identify the cause to be eliminated. Parking is expected to vote before ending work, the interior materials to be broken completely broken only after the closure of the idea of ​​power.

3.Hammer crusher maintenance and adjustment
Coupling on the elastic sleeve, such as damage is found, should be replaced. Particle size can be adjusted by replacing the screen of the style, or in the screen section of the screen frame mounted on both ends of the tank fill embedded blocks, to change the screen of the gap. Particle size can be adjusted by rotating the eccentric shaft to adjust the hammer and the screen of the gap between.Hammer crusher, if Passed a strong vibration, parking should be immediately identify and eliminate the reasons, then start hammer crusher. The impact hammer wear sector in the side, you can reverse the other side to use. Assembly or replacement of a hammer, it is necessary to maintain rotor balance. Each row of hammer shaft and hammer the total mass should correspond to hammer the hammer axis equal to the total mass of the total deviation of no more than 100g. The quality deviation is less than a single hammer ± 0.5kg.



No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s

Share My Crusher Blog

Add to FacebookAdd to DiggAdd to Del.icio.usAdd to StumbleuponAdd to RedditAdd to BlinklistAdd to TwitterAdd to TechnoratiAdd to Yahoo BuzzAdd to Newsvine

Steam Engine Driven Roller Crusher

Steam Engine Driven Roller Crusher in 1906

Crusher in 19th Used for Breaking Tin Ore

Crusher in 19th

A Simple Portable Rock Crusher in 20th

Rock Crusher in 20th

Crusher in 21th Could Pulverize The World’s Largest Meteorite to Pebbles in 10 Minutes

Crusher in 21th

Single Toggle Jaw Crusher is so Mini in 21th

Single Toggle Jaw Crusher

Biggest mobile crusher in 21th

Biggest mobile crusher in 21th



blog webmaster

%d bloggers like this: