you're reading...
Roll Crusher

Roll Crusher Maintenance

 In order to ensure that the roll crusher can work long enough.Crusher maintenance is necessary for the roll crusher.

1.The material must be evenly distributed throughout a continuous roll to ensure the maximum of output. 
2.The discharge port should be regularly checked whether there is congestion, and stops the motor to stop working before feeding, when the material completely blocks fall, when the roller becomes idle before stopping the motor.
3.If the length along the direction of feed rollers uneven wear of the roll surface is not only faster, but the point of uneven wear, there will be circular groove, so that the normal work of crushing damage, broken product of uneven size. Therefore, the chronology of the roll crusher usually has a feeder to ensure continuous feeding, uniform, and the length of the feeder roller with the same length, so that the feed roller along the length of uniform.
4.Roll crusher reasonable and proper maintenance of operational use, can ensure long-term work to reduce the parking time, only the normal management and daily checks roll crusher of the normal work in order to prevent failure and ensure their continuous work. To this end, the operator should note the following:
(1) Note that the bolts fastening components, such as found in loose should be tightened immediately.                       
(2) work must start before the roll crusher, to be normal speed, feeding the machine again, stopping the program opposite.
(3) periodic inspections of discharge port situation, if there is blockage, should be removed.
(4) pay attention to check the wear of wearing parts, and pay attention to replacement of worn parts.
(5) should not overload the machine-generated, should always pay attention to electrical instrumentation.
(6) bearing fuel in time, not to place oil spill within the bearing.
(7) should control the bearing temperature, ambient air temperature shall not exceed 25 ~ 30 ℃.
(8) release activity unit chassis plane should remove dust and other materials, so the opportunity to roll crusher the material can not be broken when the activity at the end of the bearing can not move the shelves, as well as a serious accident.

In a word ,roll crusher maintenance is very important.we can achieve much if we maintain roll crusher very well.


No comments yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Share My Crusher Blog

Add to FacebookAdd to DiggAdd to Del.icio.usAdd to StumbleuponAdd to RedditAdd to BlinklistAdd to TwitterAdd to TechnoratiAdd to Yahoo BuzzAdd to Newsvine

Steam Engine Driven Roller Crusher

Steam Engine Driven Roller Crusher in 1906

Crusher in 19th Used for Breaking Tin Ore

Crusher in 19th

A Simple Portable Rock Crusher in 20th

Rock Crusher in 20th

Crusher in 21th Could Pulverize The World’s Largest Meteorite to Pebbles in 10 Minutes

Crusher in 21th

Single Toggle Jaw Crusher is so Mini in 21th

Single Toggle Jaw Crusher

Biggest mobile crusher in 21th

Biggest mobile crusher in 21th



blog webmaster

%d bloggers like this: