The crusher will suddenly work when the phenomenon of blockage, then the crusher block, how to do? Now I turn to the phenomenon of blockage crusher how to deal with:
First, crusher block is the continuous use of the common faults that may exist in the design of the organism itself, but more are caused by the use of improper operation.
Second, feed too fast, the load increases, is caused by blockage of one of the reasons. So we use the crusher must pay attention to the feeding process, the meter pointer deflection angle should always pay attention to big problems, if more than the rated current, indicating that the motor overload, overload a long time, it will burn out the motor. This happens immediately reduce or close the door material, can also change the way feed, by increasing the feed to control the fluxes. Feeders with manual and automatic, the user should choose the right according to the actual feeder.
Users should always pay attention to the relevant operation of crusher, which would accordingly reduce the clogging phenomenon crusher．